WH3 – 3 Stage Whole House Water Filter

WH3: Whole House Water Filter

The WH3, 3 Stage Whole House Water Filter boasts an additional carbon block filter which increases the filtration without disrupting the flow. This system is simply installed to the outside of your property; connected to your main water supply line, providing clean filtered water to each single water source in the home including shower, laundry, toilet, bathroom and kitchen sink.

This system filters out chlorine, organic chemicals, microorganisms, sediments and more from your water supply.

The filtration and removal of chlorine has crucial health benefits to those suffering from asthma or skin conditions.

This filter system flows filtered water at 46 litres per minute and was created and designed to ensure that clean water is continuously flowing throughout every water outlet.

The WH3, 3 stage whole house water filter is fit for any large sized home and should have no effect on the water pressure.

Features and Benefits

• Removes chlorine, microorganisms, organic chemicals, suspended particles, sludge, dirt, rust, bad taste, odour and sediment
• 100% BPA-free
• 100% FDA approved food grade materials
• 100% Recyclable
• 3 Stages of Filtration
• Stainless Steel Bracket
• Brass thread inlet/ outlet
• Overall much healthier skin and hair

Filtration Stages

The first stage in the WH3 system is a 5 Micron PP Sediment Filter. This is an integral part of the system as it prepares the water quality for the next stage by eliminating larger particles.

Made from highly durable polypropylene fibre which has been blown for high performance.

• Meets FDA requirements for food and beverage contact
• No leachable or extractable materials to contaminate further stages

Removes larger suspended particles such as sediment, rust, sand, silt, and algae

Replace every 12 months

Carbon Block Filters are an integral part of any water filtration system, this is mainly due to their effectiveness and versatility when it comes to treating water. The 5 Micron Activated Carbon Block Filter is the second stage in the WH3 system and is the best known treatment method for volatile organic chemicals such as pesticides and herbicides, it is also the most efficient method to treat chlorine.

• High quality particulate filtration
• Tested and approved activated carbon

Removes chlorine, turbidity, bad taste & odour, sediment, dirt, trihalomethanes, chemicals and algae

Replace every 12 months

The final stage on the WH3 is a Granular Activated Carbon Filter. This is a proven option at adsorbing a wide range of impurities and contaminants in water. It removes organics, chlorine, odour, turbidity.

• High quality particulate filtration
• High density micropores for the best filtering of contaminants

Removes chlorine, turbidity, bad taste & odour, sediment, dirt, trihalomethanes, chemicals and algae

Replace every 12 months

Filter Cartridge Replacement

The cartridge filters are very easy to replace, they must firstly be depressurized by pressing on the button on top of each cartridge; releasing the pressure from inside the filter housing.

Then each housing can be easily untightened with the tool and it’s as simple as replacing the old filter with the new one.

The life of the cartridge filters varies based on your average daily use and the quality of your municipal tap water. If your tap water is relatively heavily contaminated, your filter works harder to keep your water clean, which will decrease the life of the filter. With that being said, the filters should last for 12 months.

Specifications

Dimensions: Height: 700mm | Width: 585mm | Depth: 220mm

Filters: 20″ x 4.5″ inch

Frame: Stainless steel with powder coated finish for high rust resistance

Maximum operating pressure: 116psi

Ambient water temperature: 4~45℃

Filter housing material: Food grade, BPA free reinforced polypropylene

Inlet/Oulet port: 1″